Installation Matters For Metal Hoses

1, the correct position to install metal hose, otherwise it will break quickly, reduce service life.

2, hose can be installed horizontally, can also be installed vertically or oblique installation, the most ideal state is vertical installation, at the same time should avoid installation near the wheel, if necessary, you can add a bezel.

3, the metal hose can generally be divided into 3 lengths: The 1th is the compression length, that is, the length of the hose compression to the limit position; The 2nd is the mounting length, which is the length of the hose when the middle position is half the maximum displacement, and the 3rd is the elongation, the length of the hose when it is stretched to its maximum limit.

4, hose installation should be the hose in the middle position, in this position installation state, hose by axial load can have 2 moving direction, otherwise if only in 1 directions, will affect the strength of the metal hose, reduce the service life. 

5, in the actual installation process, taking into account the use of rulers according to the calculation results to measure the length of the hose and then install may affect the production efficiency, some foreign manufacturers put the ruler directly on the hose, after the installation of the ruler cut off.